Engineering desk
Technical resources
Practical guidance on selecting, using and specifying instruments, written for engineers and buyers.
Medical devices · 2 min
Pulse oximeters: how they work and what affects accuracy
Pulse oximetry is fast and non-invasive, but its readings have known limitations every user should understand.
Read article
Medical devices
Home blood pressure monitors: validation, cuff size and correct technique
Accuracy depends on three things: a clinically validated device, the correct cuff size and a consistent measurement routine.
2 min read
Electrical safety
Insulation resistance testing: test voltages, PI and DAR
A single megohm reading tells you little. Trend data, the polarisation index and correct test voltages tell you much more.
2 min read
Electronics
Choosing an oscilloscope: bandwidth, sample rate and memory depth
Three specifications decide whether an oscilloscope shows your signal accurately. Here is how they interact.
2 min read
Measurement
True RMS vs average-responding meters: when the difference matters
Average-responding meters are accurate on pure sine waves. On modern non-linear loads they can read significantly low.
2 min read
Electrical safety
Multimeter measurement categories: CAT II, CAT III and CAT IV explained
The CAT rating on a meter describes the transient energy it can survive at a point in the installation, not just the voltage it can read. Here is how to choose correctly.
2 min read
Send a specification. Receive a quotation.
Model numbers, quantities and destination country. We reply with availability, lead time and the documents your project needs.